PIC programming
A question, a problem or a suggestion, don't hesitate : a little email
Project aim
A programmer/in circuit debugger based on an Elektor realization (October 2006).
Can program all the PIC I have used (an probably many others...).
Schematic
A simple schematic with :
- The Elektor programmer / in circuit debugger,
- An extension board able to deal with most of the PIC formats (including the in circuit connector),
- An input for the 5 V supply for an autonomous operation.
Component side
A board with no particular difficulty.
Don't forget the 7 straps on the component side.
PCB
The PCB of the board.
Click on the picture to display the full resolution PCB (63 ko).
It is a 4 by 2.5 inches board at 600 dpi resolution.
Mounted programmer
The finished project in an 4/B box of the TEKO "Aluminum" series.
I use it under MPLAB as an ICD 2 with an USB - serial converter.
One trick : I had a problem with MLAB 7.50 with the serial link number. To bypass, I had to change the serial port during the ICD installation.